METPOINT MCA

Mobile compressed air analysis

Mobile and flexible monitoring of critical process parameters Visualization of measurement data on site Support for audits through recording and simple evaluation of dataEarly detection of faults

For clean and reliable production

For mobile and flexible compressed air analysis

Continuous monitoring is essential to ensure the consistent quality of the compressed air supplied by your compressed air system. However, measurements may be necessary at points where no stationary measurement technology has (yet) been installed. For these cases, the METPOINT MCA (“Measuring Compressed Air”) is a mobile and flexible solution.

Flexible and On-Site Measurements

Flexible and on-site measurements

  • The measurement vehicle can be used directly on-site without requiring machine or system shutdowns.
  • Mobile measurements allow analysis in various operating environments and at different locations.
  • Saves time and costs by eliminating the need for complex transport of samples or fixed measurement installations.
Diagnosis of compressed air quality

Immediate and comprehensive diagnosis of compressed air quality

  • Direct detection of oil vapor, particles, and other contaminants enables a fast response to issues.
  • Real-time measurements help identify the causes of quality defects or disruptions immediately.
  • All relevant parameters can be recorded in a single measurement and correlated.
Standards and quality requirements

Compliance with standards and quality requirements

  • Many industries (e.g., food, pharmaceuticals, automotive) must adhere to strict compressed air purity regulations.
  • Mobile measurements allow easy, recurring verification of compliance with standards such as ISO 8573.
  • Audit preparations or certifications are simplified with precise measurement data.
Easy integration into existing processes

Easy integration into existing processes

  • No complex installation required, as the system is mobile and self-sufficient.
  • Simple operation by trained personnel – no specialized knowledge needed.
  • Flexible deployment, even for short-term or one-time measurements.
METPOINT MCA productline

Discover the mobile compressed air analysis products

METPOINT MCA OPS

Mobile compressed air analysis system for flexible measurement of critical process parameters

  • "O" for “oil vapour measurement" - always present
  • "P" additionally for "particle counter
  • “S” additionally for “sensors”

METPOINT MCA OS

Mobile compressed air analysis system for flexible measurement of critical process parameters

  • "O" for “oil vapour measurement" - always present
  • "S" additionally for “sensors”

METPOINT MCA OP

Mobile compressed air analysis system for flexible measurement of critical process parameters

  • "O" for “oil vapour measurement" - always present
  • 'P' additionally for “particle” counter

METPOINT MCA O

Mobile compressed air analysis system for flexible measurement of critical process parameters

  • "O" for “oil vapour measurement" - always present

METPOINT MCA OPS

  • Oil vapour measurement with the METPOINT® OCV compact system
  • Particle measurement with the particle counter "PC 400" 0.1 μm
  • Sturdy transport case with the following sensors
  • Dew point sensor (DPM SD 23) including MK PN 16 measuring chamber
  • Volume flow sensor (VFS TI 220)
  • Pressure sensor (PRM SP21)

  • Temperature sensor (PT1000)

     

  • METPOINT® BDL08 Data logger on top for easy readability.
  • Display of the residual oil content, connection options for further sensors
  • Common power supply with main switch
  • Stable mounting frame with 4 wheels (lockable)
  • Easily accessible compressed air connection for both measuring devices
  • Cover plate to protect the BDL during transport
  • Connection cable for all sensors (5 m length each)
  • 5 m compressed air hose for connecting the MCA OPS to the compressed air line

METPOINT MCA OS

  • Oil vapour measurement with the METPOINT® OCV compact system
  • Sturdy transport case with the following sensors
  • Dew point sensor (DPM SD 23) including MK PN 16 measuring chamber
  • Volume flow sensor (VFS TI 220)
  • Pressure sensor (PRM SP21)

  • Temperature sensor (PT1000)

     

  • METPOINT® BDL08 Data logger on top for easy readability.
  • Display of the residual oil content, connection options for further sensors
  • Common power supply with main switch
  • Stable mounting frame with 4 wheels (lockable)
  • Easily accessible compressed air connection for both measuring devices
  • Cover plate to protect the BDL during transport
  • Connection cable for all sensors (5 m length each)
  • 5 m compressed air hose for connecting the MCA OS to the compressed air line

METPOINT MCA OP

  • METPOINT® OCV compact system for oil vapour measurements
  • Particle counter "PC 400" 0.1 μm
  • METPOINT® BDL04 Data logger on top for easy readability.
  • Display of the residual oil content, connection options for further sensors
  • Common power supply with main switch
  • Stable mounting frame with 4 wheels (lockable)
  • Easily accessible compressed air connection for both measuring devices
  • Easily accessible compressed air connection
  • Cover plate to protect the BDL during transport

METPOINT MCA O

  • METPOINT OCV compact system for oil vapour measurements
  • METPOINT BDL04 Data logger on top for easy readability.
  • Display of the residual oil content, connection options for further sensors
  • Common power supply with main switch
  • Stable mounting frame with 4 wheels (lockable)
  • Easily accessible compressed air connection
  • Cover plate to protect the BDL during transport

Technical data

Measurable parameters

Technical data
Residual oil content
Particle concentration
Pressure dew point
Temperature
Relative humidity
Operating pressure
Volume flow compressed air
Consumption
Gas velocity
OPS
OS
OP
O
Service-orientated company

Well advised in every respect

Problems with your compressed air system

We help with quality problems such as moisture, rejects or defects - for optimum results.


Learn more

Calibration service

The calibrations are carried out according to a specified calibration procedure of BEKO TECHNOLOGIES and are a so-called ISO calibration.


Learn more